BQLYD - BUILDTEC 25685

  • MSDS: BQLYD
  • Manufacturer: EUTECTIC CORP
  • Product Name: BUILDTEC 25685
  • National Stock Number: 3439-00N036317
Product Identification

Product ID:BUILDTEC 25685
MSDS Date:12/17/1986
FSC:3439
NIIN:00N036317
MSDS Number: BQLYD

Responsible Party
EUTECTIC CORP
40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

Contractor
EUTECTIC CORP
CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

Ingredients

OF EMPLOYEE EXPOS TO CHROMIUM (VI) MATLS. ING

RTECS: 9999999ZZ


RADIATION CAN INJURE EYES & BURN SKIN.

RTECS: 9999999ZZ


FILTER LENS. PROVIDE PROT SCREENS & GOGGS, IF NEC,

RTECS: 9999999ZZ


TOO DARK TO SEE WORK ZONE; THEN GO TO NEXT LIGHTER

RTECS: 9999999ZZ


PROTECTORS, APRONS, HAT, SHOULDER

RTECS: 9999999ZZ


CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


VAPS FROM CLEANING & DEGREASING ACTIVITIES. DURING

RTECS: 9999999ZZ


IN PERCENT & FORM FROM INGS. DECOMP PRODS OF NORMAL

RTECS: 9999999ZZ


RXN/OXIDATION OF MATLS SHOWN IN INGS, PLUS THOSE FROM

RTECS: 9999999ZZ


EXPECTED CONSTITUENTS OF FUME WOULD INCL COMPLEX

RTECS: 9999999ZZ


INCL CARBON MONOXIDE & CARBON DIOXIDE. OZONE &

RTECS: 9999999ZZ


DETERM COMPOSITION & QTY OF FUMES, GASES & DUSTS TO

RTECS: 9999999ZZ


WORKER'S HELMET IF WORN/IN WORKER'S BRTHG ZONE. (SEE

RTECS: 9999999ZZ


OVEREXP TO FUMES, GASES & DUSTS MAY LEAD TO

RTECS: 9999999ZZ


OVEREXP TO NICKEL CMPDS MAY CAUSE LUNG

RTECS: 9999999ZZ


WORKERS INDICATED HIGHER INCIDENCE OF LUNG & NASAL

RTECS: 9999999ZZ


WORKERS EXPOSED TO HEXAVALENT CHROMIUM CMPDS HAVE

RTECS: 9999999ZZ


CMPDS THRU SKIN CAN CAUSE SYSTEMIC POIS PRIMARILY

RTECS: 9999999ZZ


NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3 DUST;5 FUME

ACGIH TLV: 10 MG/M3 DUST;5 FUME

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:FUMES, GASES & DUSTS CAN BE DANGEROUS
TO YOUR HLTH. ACUTE:OVEREXP TO FUMES, GASES & DUSTS MAY RSLT IN
DISCOMFORT SUCH AS DIZZ, NAUS OR DRYNESS/IRRIT OF NOSE/THROAT/EYES.
ING 1:METALLIC TASTE, NAUS, TI GHTNESS IN CHEST, FEVER, ALLERGIC
RXNS.ALLERGIC RXNS LIKELY IN ABOUT 10% OF WORKERS. ING 3:INHAL OF
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:ANTIC TO BE A CARCIN (NTP), GROUP
2B (IARC).
Effects of Overexposure:HLTH HAZ:FUME W/CHROMIUM (VI) CMPDS CAN CAUSE
IRRIT OF RESP SYS, DMG TO LUNGS & ASTHMA LIKE SYMPS. SWALLOWING
CHROMIUM (VI) SALTS CAN CAUSE SEV INJURY/DEATH. DUSTS ON SKIN CAN
FORM ULCERS. EYES MAY BE BURNED BY CHROMIUM (VI) CMPDS. ALLERGIC
RXNS LIKELY IN SOME PEOPLE FROM CHROMIUM CMPDS. ING 4:POSS EYE
IRRIT. (ING 12)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:REMOVE TO WELL-VENTED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOM BY AMERICAN RED CROSS. INHAL:REMOVE FROM
OVEREXP. APPLY ARTF RESP. SKIN:WASH W/WOAP & WATER. EYES:REMOVE BY
IRRIGATI NG W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:METAL PWDR DUST MAY PRESENT FIRE/EXPLO
HAZ UNDER FAVORABLE CNDTNS OF PARTICLE SIZE, DISPERSION & STRONG
IGNIT SOURCE.

Accidental Release

Spill Release Procedures:CLEAN-UP BY VACUUMING, WET DUSTMOP, OR WET
CLEAN-UP. AVOID DUST GENERATION. USE APPROPRIATE FILTER W/VACUUM
EQUIP TO PREVENT AIRBORNE DUST LEVELS WHICH EXCEED PEL/TLV. IF
AIRBORNE DUST IS GENERATED, U SE APPROP NIOSH/MSHA APPRVD RESP
DURINGCLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MAINTAIN EXPOS BELOW GIVEN PEL/TLV.
USE INDUS HYGIENE MONITORING TO ENSURE THAT USE OF PROD DOES NOT
CREATE EXPOS EXCEEDING PEL/TLV.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LBL ON
PROD (SEE AMERICAN NATL STD Z49.1 "SAFETY WELDING & CUTTING" &
"RECOM SAFE PRACTS FOR THERMAL SPRAYING"). TRAIN WORKER TO KEEP HIS
HEAD OUT OF FUMES, GASES & DUSTS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENT DOES NOT KEEP EXPOSURE BELOW
RECOM EXPOSURE LIMIT.
Ventilation:USE ENOUGH GENERAL VENT & LOCAL EXHAUST AT WORK SITE TO
KEEP FUMES, GASES & DUSTS FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:WELDERS GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD W/ (ING 19)
Other Protective Equipment:WEAR HAND, HEAD & BODY PROT WHICH HELP TO
PVNT INJURY FROM RADIA & FLAMES. SEE ANSI Z49.1. THIS MAY INCL ARM
(ING 21)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:OTHER CNDTNS WHICH ALSO INFLUENCE COMPOSITION & QTY OF
FUMES & GASES TO WHICH WORKERS MAY BE EXPOSED INCL:NUMBER OF
WORKERS & VOL OF WORK AREA, QUALITY & AMT OF VENT, POSITION OF
WORKE R'S HEAD W/RESPECT TO FUME PLUME, AS WELL AS PRESENCE OF
CONTAMS IN ATM & ON WORK SUCH AS CHLORINATED HYDROCARBON(ING 5)

Chemical Properties

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES & GASES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON MATL BEING
DEPOSITED. (SUPDAT)

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CNTNR OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.